ASTM standard
Source:Labthink
Viewer:49604
Issuing Date:2011-01-21
Abstract:ASTM standard
Keywords:
ASTM standard
| Standard | Description |
|---|---|
| ASTM F 2029-00 | Standard Practices for Making Heatseals for Determination of Heatsealability of Flexible Webs as Measured by Seal Strength |
| ASTM F 1770-97 | Standard Test Method for Evaluation of Solubility, Diffusivity, and Permeability of Flexible Barrier Materials to Water Vapor |
| ASTM F 1769-97 | Standard Test Method for Measurement of Diffusivity, Solubility, and Permeability of Organic Vapor Barriers Using a Flame Ionization Detector |
| ASTM F 1306-90(2002) | Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates |
| ASTM F 1115-95(2001) | Standard Test Method for Determining the Carbon Dioxide Loss of Beverage Containers |
| ASTM F 1307-02(2007) | Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor |
| ASTM F 1249-06 | Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor |
| ASTM F 392-93(2004) | Standard Test Method for Flex Durability of Flexible Barrier Materials |
| ASTM F 372-99(2003) | Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique |
| ASTM F 316-03 | Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test |
| ASTM F 88-07 | Standard Test Method for Seal Strength of Flexible Barrier Materials |
| ASTM E 1294-89(1999) | Standard Test Method for Pore Size Characteristics of Membrane Filters Using Automated Liquid Porosimeter |
| ASTM E 691-05 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 398-03 | Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement |
| ASTM E 252-06 | Standard Test Method for Thickness of Thin Foil, Sheet, and Film by Mass Measurement |
| ASTM E 177-06b | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
| ASTM E 171-94(2007) | Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials |
| ASTM E 104-02 | Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions |
| ASTM E 96/E96M-05 | Standard Test Methods for Water Vapor Transmission of Materials |
| ASTM E 4-07 | Standard Practices for Force Verification of Testing Machines |
| ASTM D 5264-98(2004) | Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester |
| ASTM D 5047-05 | Standard Specification for Polyethylene Terephthalate Film and Sheeting |
| ASTM D 4918-97(2007) | Standard Test Method for Coefficient of Static Friction of Uncoated Writing and Printing Paper by Use of the Inclined Plane Method |
| ASTM D 4917-97(2007) | Standard Test Method for Coefficient of Static and Kinetic Friction of Uncoated Writing and Printing Paper by Use of the Horizontal Plane Method |
| ASTM D 4635-01 | Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications |
| ASTM D 4508-06 | Standard Test Method for Chip Impact Strength of Plastics |
| ASTM D 4491-99a(2004) | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 4321-04 | Standard Test Method for Package Yield of Plastic Film |
| ASTM D 4272-03 | Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop |
| ASTM D 4204-06 | Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study |
| ASTM D 4169-05 | Standard Practice for Performance Testing of Shipping Containers and Systems |
| ASTM D 3985-05 | Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor |
| ASTM D 3981-03 | Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications |
| ASTM D 3654/D 3654M-06 | Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes |
| ASTM D 3574-05 | Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
| ASTM D 3475-07 | Standard Classification of Child-Resistant Packages |
| ASTM D 3420-95(2002) | Standard Test Method for Pendulum Impact Resistance of Plastic Film |
| ASTM D 3354-04 | Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method |
| ASTM D 3330/D 3330M-04 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape |
| ASTM D 3121-06 | Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball |
| ASTM D 3094-00(2005) | Standard Test Method for Seepage Rate of Aerosol Products |
| ASTM D 3079-94(2003) | Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products |
| ASTM D 3078-02 | Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission |
| ASTM D 3005-99(2004) | Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape |
| ASTM D 2979-01 | Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine |
| ASTM D 2863-06a | Standard Test Method for Measuring Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
| ASTM D 2732-03 | Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting |
| ASTM D 2684-95(2005) | Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products |
| ASTM D 2659-95(2005) | Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers |
| ASTM D 2582-07 | Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting |
| ASTM D 2570-96(2002)e1 | Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants |
| ASTM D 2463-95(2005) | Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers |
| ASTM D 2457-03 | Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics |
| ASTM D 2301-99(2004) | Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape |
| ASTM D 2176-97a(2007) | Standard Test Method for Folding Endurance of Paper by the M.I.T. Tester |
| ASTM D 2103-05 | Standard Specification for Polyethylene Film and Sheeting |
| ASTM D 1974-98(2003) | Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
| ASTM D 1938-06 | Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method |
| ASTM F 1927-07 | Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector |
| ASTM D 1922-06a | Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method |
| ASTM F 1921-98(2004) | Standard Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs |
| ASTM D 1894-06 | Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting |
| ASTM D 1822-06 | Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials |
| ASTM D 1777-96(2007) | Standard Test Method for Thickness of Textile Materials |
| ASTM D 1709-04 | Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method |
| ASTM D 1653-03 | Standard Test Methods for Water Vapor Transmission of Organic Coating Films |
| ASTM D 1525-07 | Standard Test Method for Vicat Softening Temperature of Plastics |
| ASTM D 1434-82(2003) | Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting |
| ASTM D 1424-07 | Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus |
| ASTM D 1239-07 | Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals |
| ASTM D 1204-07 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 1004-07 | Standard Test Method for Tear Resistance(Graves Tear) of Plastic Film and Sheeting |
| ASTM D 1003-00 | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM D 1000-04 | Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
| ASTM D 790-03 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
| ASTM D 737-04 | Standard Test Method for Air Permeability of Textile Fabrics |
| ASTM D 689-03 | Standard Test Method for Internal Tearing Resistance of Paper |
| ASTM D 642-00 | Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads |
| ASTM D 638-03 | Standard Test Method for Tensile Properties of Plastics |
| ASTM D 523-89(1999) | Standard Test Method for Specular Gloss |
| ASTM D 374-99 | Standard Test Methods for Thickness of Solid Electrical Insulation |
| ASTM D 276-00a | Standard Test Methods for Identification of Fibers in Textiles |
| ASTM D 257-07 | Standard Test Methods for DC or Conductance of Insulating Materials |
| ASTM D 256-06a | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics |
| ASTM C 1484-01 | Standard Specification for Vacuum Insulation Panels |
| ASTM D202-97(R02) | Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation |
| ASTM D295-99 | Standard Test Methods for Varnished Cotton Fabrics Used for Electrical Insulation |
| ASTM D645/D645M-97 | Test Method for Thickness of Paper and Paperboard |
| ASTM D648-01 | Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position |
| ASTM D726-94(R99) | Standard Test Method for Resistance of Nonporous Paper to Passage of Air |
| ASTM D747-02 | Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam |
| ASTM D751-00 | Standard Test Methods for Coated Fabrics |
| ASTM D774/D774M-97 | Standard Test Method for Bursting Strength of Paper |
| ASTM D828-97(R02) | Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus |
| ASTM D880-92(R02) | Test Method for Impact Testing for Shipping Containers and Systems |
| ASTM D882-02 | Standard Test Method for Tensile Properties of Thin Plastic Sheeting |
| ASTM D903-98 | Test Method for Peel or Stripping Strength of Adhesive Bonds |
| ASTM D951-99(R04) | Standard Test Method for Water Resistance of Shipping Containers by Spray Method |
| ASTM D996-04 | Standard Terminology of Packaging and Distribution Environments |
| ASTM D999-01 | Standard Methods for Vibration Testing of Shipping Containers |
| ASTM D1185-98a(R03) | Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping |
| ASTM D1596-97(R03) | Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material |
| ASTM D1876-01 | Standard Test Method for Peel Resistance of Adhesives (T-Peel Test) |
| ASTM D1975-95(R06) | Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails |
| ASTM D1995-92(R04) | Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives) |
| ASTM D2063-91(R02) | Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures |
| ASTM D2221-01 | Standard Test Method for Creep Properties of Package Cushioning Materials |
| ASTM D2578-04 | Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films |
| ASTM D2658-04 | Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method) |
| ASTM D2838-02 | Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting |
| ASTM D2860/D2860M-04 | Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90 Angle and Constant Stress |
| ASTM D3039/D3039M-00 | Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials |
| ASTM D3060-94(R05) | Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products |
| ASTM D3061-97(R03) | Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans |
| ASTM D3064-97(R03) | Terminology Relating to Aerosol Products |
| ASTM D3065-01(R06) | Standard Test Methods for Flammability of Aerosol Products |
| ASTM D3069-94(R05) | Standard Test Method for Delivery Rate of Aerosol Products |
| ASTM D3070-00(R05) | Standard Test Method of Rapid Pressure Determination of Pressurized Products |
| ASTM D3076-00(R05) | Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers |
| ASTM D3089-97(R03) | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D3090-72(R03) | Standard Practice for Storage Testing of Aerosol Products |
| ASTM D3091-72(R03) | Safe Filling of Low-Pressure Pressurized Products |
| ASTM D3103-99 | Standard Test Method for Thermal Insulation Quality of Packages |
| ASTM D3163-01 | Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading |
| ASTM D3164/D3164M-03 | Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading |
| ASTM D3167-03(R04) | Standard Test Method for Floating Roller Peel Resistance of Adhesives |
| ASTM D3198-97(R02) | Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures |
| ASTM D3332-99(R04) | Test Methods of Mechanical-Shock Fragility of Products, Using Shock Machines |
| ASTM D3359-02 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM D3469-97(R02) | Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures |
| ASTM D3470-97(R02) | Standard Test Method for Measurement of Removal Lug Strippage of Type IIA Child-Resistant Closures |
| ASTM D3474-90(R02) | Calibration and Use of Torque Meters Used in Packaging Applications |
| ASTM D3481-06 | Standard Test Method for Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions |
| ASTM D3652/D3652M-01(R06) | Standard Test Method for Thickness of Pressure-Sensitive Tapes |
| ASTM D3715/D3715M-98(R04) | Standard Practice for Quality Assurance of Pressure-Sensitive Tapes |
| ASTM D3759/D3759M-05 | Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes |
| ASTM D3810-97(R02) | Test Method for Minimum Application Torque of Type IA Child-Resistant Closures |
| ASTM D3811/D3811M-96(R06) | Standard Test Method for Unwind Force of Pressure-Sensitive Tapes |
| ASTM D3813/D3813M-98(R03) | Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes |
| ASTM D3815/D3815M-05 | Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Open-Flame Carbon-Arc Exposure Apparatus |
| ASTM D3816/D3816M-96(R03) | Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes |
| ASTM D3833/D3833M-96(R06) | Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes |
| ASTM D3889/D3889M-96(R06) | Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature |
| ASTM D3890-05 | Standard Test Method for Number of Strokes to Prime a Mechanical Pump Dispenser |
| ASTM D3892-93(R03) | Standard Practice for Packaging/Packing of Plastics |
| ASTM D3950-06 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D3951-98(R04) | Commercial Packaging |
| ASTM D3953-06 | Standard Specification for Strapping, Flat Steel and Seal |
| ASTM D3968-97(R02) | Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures |
| ASTM D4003-98(R03) | Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems |
| ASTM D4041-05 | Standard Test Method for Determining Spray Patterns of Manually Operated Pump Dispensers |
| ASTM D4168-95(R02) | Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials |
| ASTM D4267-95(R01) | Standard Specification for Labels for Small-Volume (100 mL or Less) Parenteral Drug Containers |
| ASTM D4279-95(R01) | Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods |
| ASTM D4332-01(R06) | Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
| ASTM D4333-05 | Test Method for the Compatibility Resistance of Mechanical Pump Dispenser Components |
| ASTM D4334-05 | Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser |
| ASTM D4335-99(R06) | Standard Test Method for Determination of Component Retention of a Mechanical Pump Dispenser |
| ASTM D4336-05 | Standard Test Methods for Determination of the Output Per Stroke of a Mechanical Pump Dispenser |
| ASTM D4504-94(R05) | Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods |
| ASTM D4577-05 | Standard Test Method for Compression Resistance of a Container Under Constant Load |
| ASTM D4649-03 | Standard Guide for Selection and Use of Stretch Wrap Films |
| ASTM D4675-06 | Standard Guide for Selection and Use of Flat Strapping Materials |
| ASTM D4727/D4727M-07 | Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes |
| ASTM D4728-06 | Standard Test Method for Random Vibration Testing of Shipping Containers |
| ASTM D4774-06 | Standard Specification for User Applied Drug Labels in Anesthesiology |
| ASTM D4775-04 | Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages) |
| ASTM D4919-03 | Standard Specification for Testing of Hazardous Materials Packagings |
| ASTM D4991-07 | Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method |
| ASTM D5022-95(R01) | Standard Specification for Identification of Vials and Ampoules Containing Concentrated Solutions of Drugs to be Diluted Before Use |
| ASTM D5052-00(R05) | Standard Test Method for Permeability of Leather to Water Vapor |
| ASTM D5077-90(R03) | Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials |
| ASTM D5094-04 | Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures |
| ASTM D5105-05 | Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight |
| ASTM D5112-98(R03) | Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products |
| ASTM D5118/D5118M-05a | Standard Practice for Fabrication of Fiberboard Shipping Boxes |
| ASTM D5168-03 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
| ASTM D5265-03 | Standard Test Method for Bridge Impact Testing |
| ASTM D5276-98(R04) | Standard Test Method for Drop Test of Loaded Containers by Free Fall |
| ASTM D5277-92(R02) | Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester |
| ASTM D5330/D5330M-06 | Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced |
| ASTM D5331-03 | Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films |
| ASTM D5375/D5375M-98(R04) | Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock |
| ASTM D5414-95(R01) | Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films |
| ASTM D5415-95(R01) | Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing |
| ASTM D5416-95(R01) | Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing |
| ASTM D5445-05 | Standard Practice for Pictorial Markings for Handling of Goods |
| ASTM D5487-98(R02) | Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines |
| ASTM D5570-94(R05) | Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure |
| ASTM D5571-94(R05) | Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity |
| ASTM D5639/D5639M-05 | Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements |
| ASTM D5728-00(R06) | Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport |
| ASTM D5734-95(R01) | Standard Test Method for Tearing Strength of Nonwoven Fabrics by Falling-Pendulum (Elmendorf) Apparatus |
| ASTM D5748-95(R01) | Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film |
| ASTM D5749-01(R06) | Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing |
| ASTM D5750/D5750M-95(R06) | Standard Guide for Width and Length of Pressure-Sensitive Tape |
| ASTM D6039/D6039M-02 | Standard Specification for Crates, Wood, Open and Covered |
| ASTM D6055-96(R07) | Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates |
| ASTM D6123/D6123M-97(R03) | Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking |
| ASTM 6179-07 | Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates |
| ASTM D6195-03 | Standard Test Methods for Loop Tack |
| ASTM D6198-07 | Standard Guide for Transport Packaging Design |
| ASTM D6199-97(R05) | Standard Practice for Quality of Wood Members of Contains and Pallets |
| ASTM D6251/D6251M-01 | Standard Specification for Wood-Cleated Panelboard Shipping Boxes |
| ASTM D6252/D6252M-98(R04) | Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle |
| ASTM D6253-05a | Standard Practice for Treatment and/or Marking of Wood Packaging Materials |
| ASTM D6254/D6254M-99(R05) | Standard Specification for Wirebound Pallet-Type Wood Boxes |
| ASTM D6255/D6255M-05 | Standard Specification for Steel or Aluminum Slotted Angle Crates |
| ASTM D6256/D6256M-99(R05) | Standard Specification for Wood-Cleated Shipping Boxes and Skidded, Load-Bearing Bases |
| ASTM D6295/D6295M-98(R04) | Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape |
| ASTM D6344-04 | Standard Test Method for Concentrated Impacts to Transport Packages |
| ASTM D6398-01 | Standard Practice to Enhance Identification of Drug Names on Labels |
| ASTM D6534-05 | Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser |
| ASTM D6535-05 | Standard Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser |
| ASTM D6536-00(R05) | Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser |
| ASTM D6537-00(R06) | Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance |
| ASTM D6551/D6551M-05 | Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus |
| ASTM D6573/D6573M-01 | Standard Specification for General Purpose Wirebound Shipping Boxes |
| ASTM D6590/D6590M-00(R06) | Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans |
| ASTM D6633-05 | Standard Test Method for Basic Functional Stability of a Mechanical Pump Dispenser |
| ASTM D6653-01(R06) | Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method |
| ASTM D6654-05 | Standard Test Method for Basic Storage Stability of a Mechanical Pump Dispenser |
| ASTM D6655-01 | Standard Terminology Relating to Mechanical Pump Dispensers |
| ASTM D6701-01 | Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers |
| ASTM D6787-02 | Standard Specification for Repositionable Note Pad |
| ASTM D6788-02 | Standard Specification for Repositionable Pressure-Sensitive Flags |
| ASTM D6804-02 | Standard Guide for Hand Hole Design in Corrugated Boxes |
| ASTM D6834-02 | Standard Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser |
| ASTM D6862-04 | Standard Test Method for 90 Degree Peel Resistance of Adhesives |
| ASTM D6880-05 | Standard Specification for Wood Boxes |
| ASTM D6881-03 | Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density |
| ASTM D7030-04 | Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine |
| ASTM D7077-04 | Standard Test Method for Evaluation of Drop Size by weight of Solutions and Suspensions |
| ASTM D7257-06 | Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions |
| ASTM D7298-06 | Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation |
| ASTM E920-97(R03) | Standard Specification for Commercially Packaged Laboratory Apparatus |
| ASTM F17-06 | Standard Terminology Relating to Flexible Barrier Materials |
| ASTM F34-02 | Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials |
| ASTM F99-76(R01) | Preparation of Flexible Barrier Material Specifications |
| ASTM F112-00(R06) | Standard Test Method for Sealability of Enveloped Gaskets |
| ASTM F119-82(R02) | Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method) |
| ASTM F874-98(R03) | Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors |
| ASTM F904-98(R03) | Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials |
| ASTM F1140-00(R05) | Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages for Medical Applications |
| ASTM F1278-96(R03) | Standard Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment |
| ASTM F1308-98(R03) | Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products |
| ASTM F1317-98(R02) | Standard Test Method for Calibration of Microwave Ovens |
| ASTM F1327-05 | Standard Terminology Relating to Barrier Materials for Medical Packaging |
| ASTM F1349-98(R03) | Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors |
| ASTM F1416-96(R03) | Standard Guide for Selection of Time-Temperature Indicators |
| ASTM F1479-98(R03) | Standard Terminology Relating to Microwave Food Packaging |
| ASTM F1500-98(R03) | Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants |
| ASTM F1519-98(R03) | Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products |
| ASTM F1608-00(R04) | Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method) |
| ASTM F1884-04 | Standard Test Method for Determining Residual Solvents in Packaging Materials |
| ASTM F1921-98(R04) | Standard Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs |
| ASTM F1927-98(R04) | Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector |
| ASTM F1929-98(R04) | Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration |
| ASTM F1980-02 | Standard Guide for Accelerated Aging of Sterile Medical Device Packages |
| ASTM F2013-05 | Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector |
| ASTM F2054-00(R05) | Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates |
| ASTM F2095-01 | Standard Test Methods for Pressure Decay Leak Test for Nonporous Flexible Packages With and Without Restraining Plates |
| ASTM F2096-04 | Standard Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test) |
| ASTM F2097-95 | Standard Guide for Design and Evaluation of Primary Packaging for Medical Products |
| ASTM F2203-02 | Standard Test Method for Linear Measurement Using Precision Steel Rule |
| ASTM F2217-02 | Standard Practice for Coating/Adhesive Weight Determination |
| ASTM F2227-02 | Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Medical Packaging Trays by CO2 Tracer Gas Method |
| ASTM F2228-02 | Standard Test Method for Non-Destructive Detection of Leaks in Medical Packaging Which Incorporates Porous Barrier Material by CO2 Tracer Gas Method |
| ASTM F2250-03 | Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials |
| ASTM F2251-03 | Standard Test Method for Thickness Measurement of Flexible Packaging Material |
| ASTM F2252-03 | Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape |
| ASTM F2338-05 | Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method |
| ASTM F2391-05 | Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas |
| ASTM F2475-05 | Standard Guide for Biocompatibility Evaluation of Medical Device Packaging Materials |
| ASTM F2476-05 | Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (Co 2TR) Through Barrier Materials Using An Infrared Detecto |
| ASTM F2559-06 | Standard Guide for Writing a Specification for Sterilizable Peel Pouches |
| ASTM STP 912 | Current Technologies in Flexible Packaging |
Title:ASTM standard
Link:http://service.labthink.cn/en/article-literature-info-110121128.html
Labthink Copyrights. Please do not copy without permission! Please indicate source when copy.
Link:http://service.labthink.cn/en/article-literature-info-110121128.html
Labthink Copyrights. Please do not copy without permission! Please indicate source when copy.
Relating Articles
- Evaluation On Water Vapor Permeability Test Methods for Plastic Films/packages National Plastic Products Quality Supervision & Testing Center (Fuzhou) Qi…
- Metallocene Polyethylene Films as Alternatives to Flexible PVC for Medical Device Fabrication
- Film Oxygen Permeability Testing-Equal Pressure Method
- Detailed Introduction to Material Permeability Indexes
Member Registration and Login In
| If you are already a member of us, please login in! | If you are not a member of us, please register for free! | ||
 ·Forget password? |
|
 ·Terms and Conditions If you have questions, please phone 86-531-85811021 |
|