兰光文献

ASTM标准

文章来源:Labthink兰光  浏览次数:8012   发布日期:2011-01-19
摘要:ASTM标准
关键词: ASTM标准
标准号 描述
ASTM F 2029-00 Standard Practices for Making Heatseals for Determination of Heatsealability of Flexible Webs as Measured by Seal Strength
ASTM F 1770-97 Standard Test Method for Evaluation of Solubility, Diffusivity, and Permeability of Flexible Barrier Materials to Water Vapor
ASTM F 1769-97 Standard Test Method for Measurement of Diffusivity, Solubility, and Permeability of Organic Vapor Barriers Using a Flame Ionization Detector
ASTM F 1306-90 Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
ASTM F 1115-95 Standard Test Method for Determining the Carbon Dioxide Loss of Beverage Containers
ASTM F 1307-02 Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
ASTM F 1249-01 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
ASTM F 392-93 Standard Test Method for Flex Durability of Flexible Barrier Materials
ASTM F 372-99 Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique
ASTM F 316-03 Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test
ASTM F 88-05 Standard Test Method for Seal Strength of Flexible Barrier Materials
ASTM E 1294-89 Standard Test Method for Pore Size Characteristics of Membrane Filters Using Automated Liquid Porosimeter
ASTM E 691-99 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 398-03 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
ASTM E 252-05 Standard Test Method for Thickness of Thin Foil, Sheet, and Film by Mass Measurement
ASTM E 177-04e1 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E 171-94 Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials
ASTM E 104-02 Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions
ASTM E 96-00 Standard Test Methods for Water Vapor Transmission of Materials
ASTM E 4-03 Standard Practices for Force Verification of Testing Machines
ASTM D 5264-98 Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
ASTM D 5047-05 Standard Specification for Polyethylene Terephthalate Film and Sheeting
ASTM D 4918-97 Standard Test Method for Coefficient of Static Friction of Uncoated Writing and Printing Paper by Use of the Inclined Plane Method
ASTM D 4917-97 Standard Test Method for Coefficient of Static and Kinetic Friction of Uncoated Writing and Printing Paper by Use of the Horizontal Plane Method
ASTM D 4635-01 Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications
ASTM D 4508-04a Standard Test Method for Chip Impact Strength of Plastics
ASTM D 4491-99a Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D 4321-04 Standard Test Method for Package Yield of Plastic Film
ASTM D 4272-03 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D 4204-00 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ASTM D 4169-04a Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 3985-02 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
ASTM D 3981-03 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM D 3654/D 3654M-02 Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
ASTM D 3574-03 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
ASTM D 3475-03a Standard Classification of Child-Resistant Packages
ASTM D 3420-95 Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D 3354-96 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
ASTM D 3330/D 3330M-04 Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
ASTM D 3121-94 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
ASTM D 3094-00 Standard Test Method for Seepage Rate of Aerosol Products
ASTM D 3079-94 Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products
ASTM D 3078-02 Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
ASTM D 3005-99 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM D 2979-01 Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine
ASTM D 2863-00 Standard Test Method for Measuring Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
ASTM D 2732-96 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
ASTM D 2684-95 Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products
ASTM D 2659-95 Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers
ASTM D 2582-03 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
ASTM D 2570-96 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 2463-95 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM D 2457-03 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
ASTM D 2301-99 Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM D 2176-97a Standard Test Method for Folding Endurance of Paper by the M.I.T. Tester
ASTM D 2103-03 Standard Specification for Polyethylene Film and Sheeting
ASTM D 1974-98 Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes
ASTM D 1938-02 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM F 1927-98 Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
ASTM D 1922-00a Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM F 1921-98 Standard Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
ASTM D 1894-01 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
ASTM D 1822-99 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
ASTM D 1777-96 Standard Test Method for Thickness of Textile Materials
ASTM D 1709-01 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D 1653-03 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
ASTM D 1525-00 Standard Test Method for Vicat Softening Temperature of Plastics
ASTM D 1434-82 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
ASTM D 1424-96 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
ASTM D 1239-98 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
ASTM D 1204-02 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D 1004-03 Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
ASTM D 1003-00 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM D 1000-04 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
ASTM D 790-03 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D 737-04 Standard Test Method for Air Permeability of Textile Fabrics
ASTM D 689-03 Standard Test Method for Internal Tearing Resistance of Paper
ASTM D 642-00(R05) Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads
ASTM D 638-03 Standard Test Method for Tensile Properties of Plastics
ASTM D 523-89(R99) Standard Test Method for Specular Gloss
ASTM D 374-99 Standard Test Methods for Thickness of Solid Electrical Insulation
ASTM D 276-00a Standard Test Methods for Identification of Fibers in Textiles
ASTM D 257-99 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
ASTM D 256-05 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM C 1484-01 Standard Specification for Vacuum Insulation Panels
ASTM D202-97(R02) Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
ASTM D295-99 Standard Test Methods for Varnished Cotton Fabrics Used for Electrical Insulation
ASTM D645/D645M-97 Test Method for Thickness of Paper and Paperboard
ASTM D648-01 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D726-94(R99) Standard Test Method for Resistance of Nonporous Paper to Passage of Air
ASTM D747-02 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D751-00 Standard Test Methods for Coated Fabrics
ASTM D774/D774M-97 Standard Test Method for Bursting Strength of Paper
ASTM D828-97(R02) Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
ASTM D880-92(R02) Test Method for Impact Testing for Shipping Containers and Systems
ASTM D882-02 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
ASTM D903-98 Test Method for Peel or Stripping Strength of Adhesive Bonds
ASTM D951-99(R04) Standard Test Method for Water Resistance of Shipping Containers by Spray Method
ASTM D996-04 Standard Terminology of Packaging and Distribution Environments
ASTM D999-01 Standard Methods for Vibration Testing of Shipping Containers
ASTM D1185-98a(R03) Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
ASTM D1596-97(R03) Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material
ASTM D1876-01 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
ASTM D1975-95(R06) Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails
ASTM D1995-92(R04) Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
ASTM D2063-91(R02) Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures
ASTM D2221-01 Standard Test Method for Creep Properties of Package Cushioning Materials
ASTM D2578-04 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films
ASTM D2658-04 Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)
ASTM D2838-02 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
ASTM D2860/D2860M-04 Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90 Angle and Constant Stress
ASTM D2860/D2860M-04 Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90 Angle and Constant Stress
ASTM D2860/D2860M-04 Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90 Angle and Constant Stress
ASTM D3039/D3039M-00 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
ASTM D3060-94(R05) Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products
ASTM D3061-97(R03) Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans
ASTM D3064-97(R03) Terminology Relating to Aerosol Products
ASTM D3065-01(R06) Standard Test Methods for Flammability of Aerosol Products
ASTM D3069-94(R05) Standard Test Method for Delivery Rate of Aerosol Products
ASTM D3069-94(R05) Standard Test Method for Delivery Rate of Aerosol Products
ASTM D3069-94(R05) Standard Test Method for Delivery Rate of Aerosol Products
ASTM D3070-00(R05) Standard Test Method of Rapid Pressure Determination of Pressurized Products
ASTM D3076-00(R05) Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers
ASTM D3089-97(R03) Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM D3090-72(R03) Standard Practice for Storage Testing of Aerosol Products
ASTM D3091-72(R03) Safe Filling of Low-Pressure Pressurized Products
ASTM D3103-99 Standard Test Method for Thermal Insulation Quality of Packages
ASTM D3163-01 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
ASTM D3164/D3164M-03 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D3167-03(R04) Standard Test Method for Floating Roller Peel Resistance of Adhesives
ASTM D3198-97(R02) Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures
ASTM D3332-99(R04) Test Methods of Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM D3359-02 Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D3469-97(R02) Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures
ASTM D3470-97(R02) Standard Test Method for Measurement of Removal Lug Strippage of Type IIA Child-Resistant Closures
ASTM D3472-97(R02) Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures
ASTM D3474-90(R02) Calibration and Use of Torque Meters Used in Packaging Applications
ASTM D3481-06 Standard Test Method for Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions
ASTM D3580-95(R04) Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
ASTM D3611-06 Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes
ASTM D3652/D3652M-01(R06) Standard Test Method for Thickness of Pressure-Sensitive Tapes
ASTM D3715/D3715M-98(R04) Standard Practice for Quality Assurance of Pressure-Sensitive Tapes
ASTM D3759/D3759M-05 Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes
ASTM D3810-97(R02) Test Method for Minimum Application Torque of Type IA Child-Resistant Closures
ASTM D3811/D3811M-96(R06) Standard Test Method for Unwind Force of Pressure-Sensitive Tapes
ASTM D3813/D3813M-98(R03) Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes
ASTM D3815/D3815M-05 Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Open-Flame Carbon-Arc Exposure Apparatus
ASTM D3816/D3816M-96(R03) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
ASTM D3833/D3833M-96(R06) Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes
ASTM D3889/D3889M-96(R06) Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature
ASTM D3890-05 Standard Test Method for Number of Strokes to Prime a Mechanical Pump Dispenser
ASTM D3892-93(R03) Standard Practice for Packaging/Packing of Plastics
ASTM D3950-06 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
ASTM D3951-98(R04) Commercial Packaging
ASTM D3953-06 Standard Specification for Strapping, Flat Steel and Seal
ASTM D3968-97(R02) Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures
ASTM D4003-98(R03) Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
ASTM D4041-05 Standard Test Method for Determining Spray Patterns of Manually Operated Pump Dispensers
ASTM D4168-95(R02) Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials
ASTM D4267-95(R01) Standard Specification for Labels for Small-Volume (100 mL or Less) Parenteral Drug Containers
ASTM D4279-95(R01) Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods
ASTM D4332-01(R06) Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing
ASTM D4333-05 Test Method for the Compatibility Resistance of Mechanical Pump Dispenser Components
ASTM D4334-05 Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
ASTM D4335-99(R06) Standard Test Method for Determination of Component Retention of a Mechanical Pump Dispenser
ASTM D4336-05 Standard Test Methods for Determination of the Output Per Stroke of a Mechanical Pump Dispenser
ASTM D4504-94(R05) Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods
ASTM D4577-05 Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM D4649-03 Standard Guide for Selection and Use of Stretch Wrap Films
ASTM D4675-06 Standard Guide for Selection and Use of Flat Strapping Materials
ASTM D4727/D4727M-07 Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes
ASTM D4728-06 Standard Test Method for Random Vibration Testing of Shipping Containers
ASTM D4774-06 Standard Specification for User Applied Drug Labels in Anesthesiology
ASTM D4775-04 Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)
ASTM D4919-03 Standard Specification for Testing of Hazardous Materials Packagings
ASTM D4991-07 Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
ASTM D5022-95(R01) Standard Specification for Identification of Vials and Ampoules Containing Concentrated Solutions of Drugs to be Diluted Before Use
ASTM D5052-00(R05) Standard Test Method for Permeability of Leather to Water Vapor
ASTM D5077-90(R03) Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials
ASTM D5094-04 Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures
ASTM D5105-05 Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight
ASTM D5112-98(R03) Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products
ASTM D5118/D5118M-05a Standard Practice for Fabrication of Fiberboard Shipping Boxes
ASTM D5168-03 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
ASTM D5265-03 Standard Test Method for Bridge Impact Testing
ASTM D5276-98(R04) Standard Test Method for Drop Test of Loaded Containers by Free Fall
ASTM D5277-92(R02) Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
ASTM D5330/D5330M-06 Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
ASTM D5331-03 Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films
ASTM D5375/D5375M-98(R04) Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
ASTM D5414-95(R01) Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
ASTM D5415-95(R01) Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing
ASTM D5416-95(R01) Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing
ASTM D5445-05 Standard Practice for Pictorial Markings for Handling of Goods
ASTM D5487-98(R02) Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines
ASTM D5570-94(R05) Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure
ASTM D5571-94(R05) Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity
ASTM D5639/D5639M-05 Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements
ASTM D5728-00(R06) Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport
ASTM D5734-95(R01) Standard Test Method for Tearing Strength of Nonwoven Fabrics by Falling-Pendulum (Elmendorf) Apparatus
ASTM D5748-95(R01) Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film
ASTM D5749-01(R06) Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing
ASTM D5750/D5750M-95(R06) Standard Guide for Width and Length of Pressure-Sensitive Tape
ASTM D6039/D6039M-02 Standard Specification for Crates, Wood, Open and Covered
ASTM D6055-96(R07) Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates
ASTM D6123/D6123M-97(R03) Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking
ASTM 6179-07 Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates
ASTM D6195-03 Standard Test Methods for Loop Tack
ASTM D6198-07 Standard Guide for Transport Packaging Design
ASTM D6199-97(R05) Standard Practice for Quality of Wood Members of Contains and Pallets
ASTM D6251/D6251M-01 Standard Specification for Wood-Cleated Panelboard Shipping Boxes
ASTM D6252/D6252M-98(R04) Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle
ASTM D6253-05a Standard Practice for Treatment and/or Marking of Wood Packaging Materials
ASTM D6254/D6254M-99(R05) Standard Specification for Wirebound Pallet-Type Wood Boxes
ASTM D6255/D6255M-05 Standard Specification for Steel or Aluminum Slotted Angle Crates
ASTM D6256/D6256M-99(R05) Standard Specification for Wood-Cleated Shipping Boxes and Skidded, Load-Bearing Bases
ASTM D6295/D6295M-98(R04) Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape
ASTM D6344-04 Standard Test Method for Concentrated Impacts to Transport Packages
ASTM D6398-01 Standard Practice to Enhance Identification of Drug Names on Labels
ASTM D6534-05 Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser
ASTM D6535-05 Standard Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser
ASTM D6536-00(R05) Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
ASTM D6537-00(R06) Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance
ASTM D6551/D6551M-05 Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
ASTM D6573/D6573M-01 Standard Specification for General Purpose Wirebound Shipping Boxes
ASTM D6590/D6590M-00(R06) Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans
ASTM D6633-05 Standard Test Method for Basic Functional Stability of a Mechanical Pump Dispenser
ASTM D6653-01(R06) Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method
ASTM D6654-05 Standard Test Method for Basic Storage Stability of a Mechanical Pump Dispenser
ASTM D6655-01 Standard Terminology Relating to Mechanical Pump Dispensers
ASTM D6701-01 Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers
ASTM D6787-02 Standard Specification for Repositionable Note Pad
ASTM D6788-02 Standard Specification for Repositionable Pressure-Sensitive Flags
ASTM D6804-02 Standard Guide for Hand Hole Design in Corrugated Boxes
ASTM D6834-02 Standard Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser
ASTM D6862-04 Standard Test Method for 90 Degree Peel Resistance of Adhesives
ASTM D6880-05 Standard Specification for Wood Boxes
ASTM D6881-03 Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density
ASTM D7030-04 Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine
ASTM D7077-04 Standard Test Method for Evaluation of Drop Size by weight of Solutions and Suspensions
ASTM D7257-06 Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions
ASTM D7298-06 Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
ASTM E920-97(R03) Standard Specification for Commercially Packaged Laboratory Apparatus
ASTM F17-06 Standard Terminology Relating to Flexible Barrier Materials
ASTM F34-02 Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials
ASTM F99-76(R01) Preparation of Flexible Barrier Material Specifications
ASTM F99-76(R01) Preparation of Flexible Barrier Material Specifications
ASTM F112-00(R06) Standard Test Method for Sealability of Enveloped Gaskets
ASTM F119-82(R02) Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)
ASTM F874-98(R03) Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors
ASTM F904-98(R03) Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
ASTM F1140-00(R05) Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages for Medical Applications
ASTM F1278-96(R03) Standard Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment
ASTM F1308-98(R03) Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
ASTM F1317-98(R02) Standard Test Method for Calibration of Microwave Ovens
ASTM F1327-05 Standard Terminology Relating to Barrier Materials for Medical Packaging
ASTM F1349-98(R03) Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors
ASTM F1416-96(R03) Standard Guide for Selection of Time-Temperature Indicators
ASTM F1479-98(R03) Standard Terminology Relating to Microwave Food Packaging
ASTM F1500-98(R03) Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
ASTM F1519-98(R03) Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
ASTM F1608-00(R04) Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)
ASTM F1884-04 Standard Test Method for Determining Residual Solvents in Packaging Materials
ASTM F1921-98(R04) Standard Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
ASTM F1927-98(R04) Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
ASTM F1929-98(R04) Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
ASTM F1980-02 Standard Guide for Accelerated Aging of Sterile Medical Device Packages
ASTM F2013-05 Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector
ASTM F2054-00(R05) Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates
ASTM F2095-01 Standard Test Methods for Pressure Decay Leak Test for Nonporous Flexible Packages With and Without Restraining Plates
ASTM F2096-04 Standard Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test)
ASTM F2097-95 Standard Guide for Design and Evaluation of Primary Packaging for Medical Products
ASTM F2203-02 Standard Test Method for Linear Measurement Using Precision Steel Rule
ASTM F2217-02 Standard Practice for Coating/Adhesive Weight Determination
ASTM F2227-02 Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Medical Packaging Trays by CO2 Tracer Gas Method
ASTM F2228-02 Standard Test Method for Non-Destructive Detection of Leaks in Medical Packaging Which Incorporates Porous Barrier Material by CO2 Tracer Gas Method
ASTM F2250-03 Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials
ASTM F2251-03 Standard Test Method for Thickness Measurement of Flexible Packaging Material
ASTM F2252-03 Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape
ASTM F2338-05 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
ASTM F2391-05 Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
ASTM F2475-05 Standard Guide for Biocompatibility Evaluation of Medical Device Packaging Materials
ASTM F2476-05 Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (Co 2TR) Through Barrier Materials Using An Infrared Detecto
ASTM F2559-06 Standard Guide for Writing a Specification for Sterilizable Peel Pouches
ASTM STP 912 Current Technologies in Flexible Packaging

会员注册登录

   如果您已经是我们的会员,请登录    如果您还不是我们的会员,请免费注册


·忘记密码?
  • 用户名
  • 密 码
  • 验证码 验证码:


·注册须知

如果您有疑问
请咨询
0531-85068566
  • 用 户 名 *
  • 密  码 *
  • 确认密码 *
  • 姓  名 *
  • 电子邮箱 *
  • 手机号码 *
  • 公司名称 *
  • 部门职务 *
  • 地  址 *
  • 邮  编  
  • 办公电话 *
  • 公司传真  
  • 公司网站