ISO standard
Source:Labthink
Viewer:4726
Issuing Date:2011-01-21
Abstract:ISO standard
Keywords:
ISO standard
| Standard | Description |
|---|---|
| ISO 15106-3 | Plastics － Film and sheeting － Determination of water vapour transmission rate － Part 3: Electrolytic detection sensor method |
| ISO 15106-2 | Plastics － Film and sheeting － Determination of water vapour transmission rate － Part 2: Infrared detection sensor method |
| ISO 15106-1 | Plastics － Film and sheeting － Determination of water vapour transmission rate － Part 1: Humidity detection sensor method |
| ISO 15105-1 | Plastics － Film and sheeting － Determination of gas-transmission rate － Part 1: Differential-pressure method |
| ISO 15105-2 | Plastics － Film and sheeting － Determination of gas-transmission rate － Part 2: Equal-pressure method |
| ISO 11501: 1995 | Plastics － Film and sheeting － Determination of dimensional change on heating |
| ISO 8295-1986 | Plastics － Film and sheeting － Determination of the coefficients of friction |
| ISO 7765-1: 1988 | Plastics film and sheeting － Determination of impact resistance by the free-falling dart method Part 1: Staircase methods |
| ISO 6383-2: 1983 | Plastics － Film and sheeting － Determination of tear resistance － Part 2: Elmendorf method |
| ISO 2759: 1983 | Board － Determination of bursting strength |
| ISO 2556-2001 | Plastics － Determination of the gas transmission rate of films and thin sheets under atmospheric pressure － Manometric method |
| ISO 2528 | Sheet materials － Determination of water vapour transmission rate － Gravimetric (dish) method |
| ISO 534: 1988 | Paper and board － Determination of thickness and apparent bulk density or apparent sheet density |
| ISO 11897:1999 | Packaging － Sacks made from thermoplastic flexible film － Tear propagation on edge folds |
| ISO 11502:1995 | Plastics － Film and sheeting － Determination of blocking resistance |
| ISO 11339:2003 | Adhesives －T-peel test for flexible-to-flexible bonded assemblies |
| ISO 9932:1990 | Paper and board － Determination of water vapour transmission rate of sheet materials － Dynamic sweep and static gas methods |
| ISO 9913-2:2000 | Optics and optical instruments － Contact lenses － Part 2: Determination of oxygen permeability and transmissibility by the coulometric method |
| ISO 9913-1:1996 | Optics and optical instruments － Contact lenses － Part 1: Determination of oxygen permeability and transmissibility with the FATT method |
| ISO 9237:1995 | Textiles － Determination of the permeability of fabrics to air |
| ISO 8510-2:1990 | Adhesives － Peel test for a flexible-bonded-to-rigid test specimen assembly － Part 1: 180 ° peel |
| ISO 8510-1:1990 | Adhesives － Peel test for a flexible-bonded-to-rigid test specimen assembly － Part 1: 90 ° peel |
| ISO 8317:2003 | Child-resistant packaging － Requirements and testing procedures for reclosable packages |
| ISO 8296:2003 | Plastics － Film and sheeting － Determination of wetting tension |
| ISO 7765-2:1994 | Plastics film and sheeting － Determination of impact resistance by the free-falling dart method － Part 2: Instrumented puncture test |
| ISO 7765-1:1988 | Plastics film and sheeting － Determination of impact resistance by the free-falling dart method － Part 1: Staircase methods |
| ISO 7231:1984 | Polymeric materials, cellular flexible － Method of assessment of air flow value at constant pressure-drop |
| ISO 7229:1997 | Rubber- or plastics-coated fabrics － Measurement of gas permeability |
| ISO 6452:2000 | Rubber- or plastics-coated fabrics － Determination of fogging characteristics of trim materials in the interior of automobiles |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results － Part 1: General principles and definitions |
| ISO 5636-5:2003 | Paper and board － Determination of air permeance and air resistance (medium range) － Part 5: Gurley method |
| ISO 5636-3:1992 | Paper and board － Determination of air permeance (medium range) － Part 3: Bendtsen method |
| ISO 5636-1:1984 | Paper and board － Determination of air permeance (medium range) － Part 1: General method |
| ISO 4638:1984 | Polymeric materials, cellular flexible － Determination of air flow permeability |
| ISO 4591:1992 | Plastics － Film and sheeting － Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness) |
| ISO 4589-3:1996 | Plastics － Determination of burning behaviour by oxygen index － Part 3: Elevated-temperature test |
| ISO 4589-2:1996 | Plastics － Determination of burning behaviour by oxygen index － Part 2: Ambient-temperature test |
| ISO 4589-1:1996 | Plastics － Determination of burning behaviour by oxygen index － Part 1: Guidance |
| ISO 3034:1975 | Corrugated fibreboard － Determination of thickness |
| ISO 2782:1995 | Rubber, vulcanized or thermoplastic － Determination of permeability to gases |
| ISO 2758:2001 | Paper － Determination of bursting strength |
| ISO 1974:1990 | Paper － Determination of tearing resistance (Elmendorf method) |
| ISO 1663:1999 | Rigid cellular plastics － Determination of water vapour transmission properties |
| ISO 483:1988 | Plastics － Small enclosures for conditioning and testing using aqueous solutions to maintain relative humidity at constant value |
| ISO 306:2004 | Plastics － Thermoplastic materials － Determination of Vicat softening temperature (VST) |
| ISO 75-3:2004 | Plastics － Determination of temperature of deflection under load － Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics |
| ISO 75-2:2004 | Plastics － Determination of temperature of deflection under load － Part 2: Plastics and ebonite |
| ISO 75-1:2004 | Plastics － Determination of temperature of deflection under load － Part 1: General test method |
| ISO 139-2005 | Textiles - Standard atmospheres for conditioning and testing |
| ISO 527.2-1993 | Plastics; determination of tensile properties; part 2: test conditions for moulding and extrusion plastics |
| ISO 2234-2000 | Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load |
| ISO 3290-2001 | Rolling bearings - Balls - Dimensions and tolerances |
| ISO 4593-1993 | Plastics; film and sheeting; determination of thickness by mechanical scanning |
| ISO 6922-1987 | Adhesives; Determination of tensile strength of butt joints |
| ISO 7965.2-1993 | Sacks - Drop test - Part 2: Sacks made from thermoplastic flexible film |
| ISO 8980.5-2005 | Ophthalmic optics - Uncut finished spectacle lenses - Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant |
| ISO 9073.10-2003 | Textiles - Test methods for nonwovens - Part 10: Lint and other particles generation in the dry state |
| ISO 11607.1-2006 | Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems |
| ISO 11607.2-2006 | Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes |
| ISO 12048-1994 | Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester |
| ISO 13468.1-1996 | Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument |
| ISO 13468.2-1999 | Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument |
| ISO 14268-2002 | Leather - Physical and mechanical tests - Determination of water vapour permeability |
| ISO 14782-1999 | Plastics - Determination of haze for transparent materials |
| SO 15119-2000 | Packaging - Sacks - Determination of the friction of filled sacks |
| ISO 15359-1999 | Paper and board - Determination of the static and kinetic coefficients of friction - Horizontal plane method |
| ISO Guide 30-1992 | Terms and definitions used in connection with reference materials |
Title:ISO standard
Link:http://service.labthink.cn/en/article-Standars-info-110121130.html
Labthink Copyrights. Please do not copy without permission! Please indicate source when copy.
Link:http://service.labthink.cn/en/article-Standars-info-110121130.html
Labthink Copyrights. Please do not copy without permission! Please indicate source when copy.
Relating Articles
- Introduction to Standard GB/T 21529-2008 -- Determination of Water Vapour Transmission Rate for Plastic Film and Sheeting-----Electrolytic Detection Sens…
- Breakthrough Made in Water Vapor Permeability Instruments of Gravimetric Method
- Gas Permeability Testing and Air Permeability Testing of Materials
- New Method for Water Vapor Permeability Testing of Medicine Package — Electrolytic Analysis
- Detailed Introduction to Material Permeability Indexes
Member Registration and Login In
| If you are already a member of us, please login in! | If you are not a member of us, please register for free! | ||
 ·Forget password? |
|
 ·Terms and Conditions If you have questions, please phone 86-531-85811021 |
|